Specifications

Chapter 1 Configuring Interfaces and Circuits
Configuring Interfaces
1-26
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-8241-02
To clear interface statistics, use the clear statistics command in SuperUser mode.
For example:
# clear statistics
Last Change The value of sysUpTime at the time the interface entered its
current operational state. If the state has not changed since
the time the CSS came up, the sysUptime is when the port
was initialized.
Operational The current operational state of the interface (Up, Down, or
Testing). The Testing state indicates no operational packets
can be passed.
Speed An estimate of the interface's current bandwidth, in bits per
second. For interfaces that do not vary in bandwidth or for
those where no accurate estimation can be made, this object
contains the nominal bandwidth.
Queue Len The length of the output packet queue (in packets).
Out Octets The total number of octets transmitted out of the interface,
including framing characters.
Out Unicast The total number of packets that higher-level protocols
requested be transmitted to a subnetwork-unicast address,
including those packets that were discarded or not sent.
Out Multicast The total number of packets that higher-level protocols
requested be transmitted to a non-unicast (for example, a
subnetwork-broadcast or subnetwork-multicast) address,
including those packets that were discarded or not sent.
Out Errors The number of outbound packets that could not be
transmitted because of errors.
Out Discards The number of outbound packets that were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.
Table 1-8 Field Descriptions for the show mibii Command (continued)
Field Description