Datasheet

Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 20 of 25
Product ID Description
15454-CC-FTA=
15454E-CC-FTA=
15454-FTA3-T=
15454E-FTA-48V=
Controlled cooling fan-tray assembly, includes fan-tray filter
Fan-tray assembly, includes fan-tray filter
15454E-CTP-MIC48V= Mechanical interface card, craft, timing, and power inputs, ETSI
15454E-AP-MIC48V= Mechanical interface card, alarm, and power inputs, ETSI
15454-AIR-RAMP=
15454E-AIR-RAMP=
Air ramp (ships with ANSI 19” and 23” and ETSI 600mm mounting brackets)
15454-AIC-I=
15454E-AIC-I=
Alarm Interface Controller, international card
15454-BLANK=
15454E-BLANK=
15454E-BLANK-FMEC=
Shelf slot-filler panel, fits any slot in Cisco ONS 15454 ANSI shelf assembly
Shelf slot-filler panel, fits any slot in Cisco ONS 15454 ETSI shelf assembly
Shelf FMEC slot-filler panel, fits Cisco ONS 15454 ETSI shelf assembly
15454-MS-ISC-100T= Integrated 100T Ethernet switch for multi-shelf management
15454-EAP-MF= Mechanical frame for Ethernet adapter panel (ships with ANSI 19” and 23” and ETSI 600mm
mounting brackets)
15454-EAP= Ethernet adapter panel (to be used with MS-ISC-100T to allow proper cable management)
15454-MEC= Multiple Ethernet cable to replicate the MS-ISC-100T Ethernet ports on the EAP unit
15454-PP-64-LC=
15454-PP2-64-LC=
15454-PP-80-LC=
64-port fiber patch-panel shelf, 1 rack unit (RU) high, LC-to-LC connectors, 32 duplex LC
adapters, supports up to 8 multi-fiber cable assemblies (1 MPO to 8x LC), includes 2 MPO to
8x LC 2.3-meter cable assemblies (uninstalled). Ships with ANSI 19” and 23” and ETSI
600mm mounting brackets.
64-port fiber patch-panel shelf, 2 RUs high, LC-to-LC connectors, 32 duplex LC adapters,
includes 8 MPO to 8x LC 2.3-meter cable assemblies (pre-cabled). Ships with ANSI 19” and
23” and ETSI 600mm mounting brackets.
80-port fiber patch-panel shelf, 2 RUs high, LC-to-LC connectors, 40 duplex LC adapters,
includes 10 MPO to 8x LC 2.3-meter cable assemblies (pre-cabled). Ships with ANSI 19” and
23” and ETSI 600mm mounting brackets.
15454-PP-MESH-4=
15454-PP-MESH-8=
Degree-4 Mesh Patch Panel, 2 RUs high, 1x LC and 1x MPO adapter per direction. Ships with
ANSI 19” and 23” and ETSI 600mm mounting brackets.
Degree-8 Mesh Patch Panel, 2 RUs high, 1x LC and 1x MPO adapter per direction. Ships with
ANSI 19” and 23” and ETSI 600mm mounting brackets.
15454-FBR-STRG= Fiber-storage shelf, supports eight 2-meter ribbon cables (8-fiber) plus 40 2-meter 2-mm fiber
cables. Ships with ANSI 19” and 23” and ETSI 600mm mounting brackets.
15216-FL-SA= FlexLayer shelf assembly, 4 module slots, 1 RU high, Cisco FlexLayer platform. Ships with
ANSI 19” and 23” mounting brackets.
15216-CS-SM-Y= Y-cable splitter/combiner module for 2 wavelengths protection, single-mode fiber, single-width
module, installs in Cisco FlexLayer (15216-FL-SA=) shelf assembly
15216-CS-MM-Y= Y-cable splitter/combiner module for 2 wavelengths protection, multimode fiber, single-width
module, installs in Cisco FlexLayer (15216-FL-SA=) shelf assembly
15454-YCBL-LC= Y-cable storage shelf, 2 RUs high, supports up to 8 Y-cable splitter/combiner modules. Ships
with ANSI 19” and 23” and ETSI 600mm mounting brackets.
15454-YCM-SM-LC= Y-cable splitter/combiner module for 1 wavelength protection, single-mode fiber, LC adapters,
installs in Cisco Y-cable storage (15454-YCBL-LC=) shelf assembly
15454-YCM-MM-LC= Y-cable splitter/combiner module for 1 wavelength protection, multimode fiber, LC adapters,
installs in Cisco Y-cable storage (15454-YCBL-LC=) shelf assembly
Service Interfaces
1
15454-10DME-C= 10-Gbps E-FEC data muxponder card, 8x SFP-based client interfaces, full C-band tunable on
50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors
15454-10DME-L= 10-Gbps E-FEC data muxponder card, 8x SFP-based client interfaces, full L-band tunable on
50-GHz ITU wavelengths, DWDM line with LC connectors
15454-10E-L1-C= 10-Gbps E-FEC multirate transponder card, 1x XFP-based client interface, full C-band tunable
on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors
1
Wavelength plan is outlined in Tables 3 and 4 in this document. Cisco online lead-time tool is available for determining the lead-
time of individual wavelengths, if different.