Installation guide

Installing a Mini-Flash Module
vi
Cisco 1750 Router Hardware Installation Guide
78-6169-02
Installing a Mini-Flash Module
You can install a mini-Flash module (shown in Figure 3) to increase the amount
of Flash memory in the router.
Figure 3 Mini-Flash Module
Removing a Mini-Flash Module
Follow these steps to remove a mini-Flash memory module:
Note You need to remove the motherboard from the chassis to remove the
mini-Flash memory module.
Warning During this procedure, wear grounding wrist straps to avoid ESD
damage to the router. Do not directly touch the backplane with
your hand or any metal tool, or you could shock yourself.
Notched edge
12612