Specifications

Maintaining the Router B-9
Upgrading the DRAM SIMM
Step 4 Remove the existing DRAM SIMM by pulling outward on the connectors to
unlatch them, as shown in Figure B-6. Be careful not to break the holders on the
SIMM connector.
Caution To prevent damage, do not press on the center of the SIMMs. Handle each SIMM
carefully.
Step 5 Position the new SIMM so that the polarization notch is located at the left end
of the SIMM socket. (See Figure B-6.)
Figure B-6 Removing and Replacing the DRAM SIMM
Polarization notch
DRAM SIMM card
Pull the tabs away with
your thumbs, bracing your
forefingers against the
posts. Raise the SIMM
to a vertical position.
H6592
Connector edge of
the system card