Specifications

B-14 Router Installation and Configuration Guide
Closing the Chassis
Caution To fit the two sections together, it may be necessary to work them together at one
end and then the other, working back and forth; however, use care to prevent bending the
chassis edges.
Figure B-8 Replacing the Chassis Cover
Step 3
When the two sections fit together snugly, turn the chassis so that the bottom is
facing up, with the front panel toward you.
Step 4 Replace the cover screw. (See Figure B-1.) Tighten the screw to no more than
8 or 9 inch/pounds of torque.
Step 5 Reinstall the chassis on the wall, rack, desktop, or table.
Step 6 Replace all cables.
H3560
FrontRear
Left end
toward you
Top section
Bottom section
A
B
C