Specifications

C-9

Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference

OL-13271-06

Appendix C Cisco Catalyst Blade Switch 3130 for Dell Show Platform Commands

show platform frontend-controller

Use the show platform frontend-controller privileged EXEC command to display counter and status

information for the front-end controller manager and subordinate applications and to display the

hardware and software information for the front-end controller.

Syntax Descriptions

Command Modes Privileged EXEC

Command History

Usage Guidelines

The subordinate number range is 0 to 2.

You should use this command only when you are working directly with a technical support representative

while troubleshooting a problem. Do not use this command unless a technical support representative asks

you to do so.

buffer Display the last 1024 bytes sent from the manager to the subordinate and the

reverse.

generic Display the generic counters that do not specifically apply to the manager or

subordinate.

manager number Display the counters for the manager and the subordinate specified by

number. See the “Usage Guidelines” section for the number range.

subordinate number Display the subordinate status and the counters for the subordinate specified

by number. See the “Usage Guidelines” section for the number range.

version number Display the hardware and software version information for the subordinate

status specified by number. See the “Usage Guidelines” section for the

number range.

Release Modification

12.2(40)EX1 This command was introduced.