Specifications

C-40
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-06
Appendix C Cisco Catalyst Blade Switch 3130 for Dell Show Platform Commands
show platform stack ports
show platform stack ports
Use the show platform stack ports privileged EXEC command to display platform-dependent stack
information.
show platform stack ports {buffer | history}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks
you to do so.
Note This command is supported only on stacking-capable switches.
Examples This is an example of the show platform stack port buffer command output:
Switch# show platform stack ports buffer
Stack Debug Event Data Trace
==============================================================
Event type LINK: Link status change
Event type RAC: RAC changes to Not OK
Event type SYNC: Sync changes to Not OK
==============================================================
Event Stack Stack PCS Info Ctrl-Status Loopback Cable
Count Port IOS / HW length
========= ===== =================================== =========== ======== ========
Event type: LINK OK Stack Port 1
0000000011 1 FF08FF00 860302A5 AA55FFFF FFFFFFFF 1CE61CE6 Yes/Yes No cable
0000000011 2 FF08FF00 86031805 55AAFFFF FFFFFFFF 1CE61CE6 Yes/Yes No cable
Event type: LINK OK Stack Port 2
0000000012 1 FF08FF00 860302A5 AA55FFFF FFFFFFFF 1CE61CE6 Yes/Yes No cable
0000000012 2 FF08FF00 86031805 55AAFFFF FFFFFFFF 1CE61CE6 Yes/Yes No cable
Event type: RAC
0000000013 1 FF08FF00 860302A5 AA55FFFF FFFFFFFF 1CE61CE6 Yes/Yes No cable
0000000013 2 FF08FF00 86031805 55AAFFFF FFFFFFFF 1CE61CE6 Yes/Yes No cable
This is an example of show platform stack ports history command output:
Switch# show platform stack ports history
Switch#/ Lost Sync # times Link # Changes
buffer Display the stack port link and sync state events.
history Display the stack port history.
Release Modification
12.2(50)SE This command was introduced.