Specifications

2-174
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-06
Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
epm access-control open
epm access-control open
Use the epm access-control open global configuration command on the switch stack or on a standalone
switch to configure an open directive for ports that do not have an access control list (ACL) configured.
Use the no form of this command to disable the open directive.
epm access-control open
no epm access-control open
Syntax Description This command has no keywords or arguments.
Defaults The default directive applies.
Command Modes Global configuration
Command History
Usage Guidelines Use this command to configure an open directive that allows hosts without an authorization policy to
access ports configured with a static ACL. If you do not configure this command, the port applies the
policies of the configured ACL to the traffic. If no static ACL is configured on a port, both the default
and open directives allow access to the port.
Examples This example shows how to configure an open directive.
Switch(config)# epm access-control open
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command Description
show running-config Displays the operating configuration. For syntax information, use this link to
the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command_
reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate to
the command.