Specifications

2-467
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show access-lists
show access-lists
Use the show access-lists privileged EXEC command to display access control lists (ACLs) configured
on the switch.
show access-lists [name | number | hardware counters | ipc]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines The switch supports only IP standard and extended access lists. Therefore, the allowed numbers are only
1 to 199 and 1300 to 2699.
This command also displays the MAC ACLs that are configured.
Note Though visible in the command-line help strings, the rate-limit keywords are not supported.
name (Optional) Name of the ACL.
number (Optional) ACL number. The range is 1 to 2699.
hardware counters (Optional) Display global hardware ACL statistics for switched and
routed packets.
ipc (Optional) Display Interprocess Communication (IPC) protocol
access-list configuration download information.
Release Modification
12.2(40)EX1 This command was introduced.