Specifications

2-472
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show authentication
show authentication
Use the show authentication command in EXEC mode to display information about authentication
manager events on the switch.
show authentication {interface interface-id | registrations | sessions [session-id session-id]
[handle handle] [interface interface-id] [mac mac] [method method] | statistics [summary]}
Syntax Description
Command Default This command has no default settings.
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines Table 2-28 describes the significant fields shown in the output of the show authentication command.
Note The possible values for the status of sessions are shown below. For a session in terminal state, Authz
Success or Authz Failed is displayed along with No methods if no method has provided a result.
interface interface-id (Optional) Display all of the authentication manager details for the specified
interface.
method method (Optional) Displays all clients authorized by a specified authentication method
(dot1x, mab, or webauth)
registrations (Optional) Display authentication manager registrations
sessions (Optional) Display detail of the current authentication manager sessions (for
example, client devices). If you do not enter any optional specifiers, all current
active sessions are displayed. You can enter the specifiers singly or in
combination to display a specific session (or group of sessions).
session-id session-id (Optional) Specify an authentication manager session.
handle handle (Optional) Specify a range from 1 to 4294967295.
mac mac (Optional) Display authentication manager information for a specified
MAC address.
statistics (Optional) Display authentication statistics in detail.
summary (Optional) Display authentication statistics summary
Release Modification
12.2(50)SE This command was introduced.