Specifications

2-499
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show controllers tcam
show controllers tcam
Use the show controllers tcam privileged EXEC command to display the state of the registers for all
hardware memory in the system and for all hardware interface ASICs that are content-addressable
memory-controllers.
show controllers tcam [asic [number]] [detail]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines This display provides information that might be useful for Cisco technical support representatives
troubleshooting the switch.
Examples This is an example of output from the show controllers tcam command:
Switch# show controllers tcam
------------------------------------------------------------------------
TCAM-0 Registers
------------------------------------------------------------------------
REV: 00B30103
SIZE: 00080040
ID: 00000000
CCR: 00000000_F0000020
RPID0: 00000000_00000000
RPID1: 00000000_00000000
RPID2: 00000000_00000000
RPID3: 00000000_00000000
HRR0: 00000000_E000CAFC
HRR1: 00000000_00000000
HRR2: 00000000_00000000
HRR3: 00000000_00000000
HRR4: 00000000_00000000
HRR5: 00000000_00000000
HRR6: 00000000_00000000
HRR7: 00000000_00000000
<output truncated>
GMR31: FF_FFFFFFFF_FFFFFFFF
GMR32: FF_FFFFFFFF_FFFFFFFF
asic (Optional) Display port ASIC hardware information.
number (Optional) Display information for the specified port ASIC number. The range is
from 0 to 15.
detail (Optional) Display detailed hardware register information.
Release Modification
12.2(40)EX1 This command was introduced.