Specifications

2-501

Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference

OL-13270-06

Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands

show controllers utilization

Use the show controllers utilization command in EXEC mode to display bandwidth utilization on

the switch or specific ports.

show controllers [interface-id] utilization

Syntax Description

Command Modes User EXEC

Privileged EXEC

Command History

Examples This is an example of output from the show controllers utilization command.

Switch# show controllers utilization

Port Receive Utilization Transmit Utilization

Gi1/0/2 0 0

Gi1/0/3 0 0

Gi1/0/4 0 0

Gi1/0/5 0 0

Gi1/0/6 0 0

Gi1/0/7 0 0

Gi2/0/1 0 0

Gi2/0/2 0 0

Switch Receive Bandwidth Percentage Utilization : 0

Switch Transmit Bandwidth Percentage Utilization : 0

Switch Fabric Percentage Utilization : 0

This is an example of output from the show controllers utilization command on a specific port:

Switch# show controllers gigabitethernet1/0/1 utilization

Receive Bandwidth Percentage Utilization : 0

Transmit Bandwidth Percentage Utilization : 0

interface-id (Optional) ID of the switch interface.

Release Modification

12.2(40)EX1 This command was introduced.