Specifications

2-504
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show diagnostic
Defaults This command has no default setting.
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines The show diagnostic post command output is the same as the show post command output.
In switch stacks, if you do not enter the switch number parameter with the content, result, schedule,
and switch keywords, information for all stack members is displayed.
show diagnostic result switch [number | all] [detail] command output is the same as the show
diagnostic switch [number | all] [detail] command output.
show diagnostic result [detail] command output is the same as the show diagnostic switch [detail]
command output.
Examples This example shows how to display the online diagnostics that are configured on all the switches in a stack:
Switch# show diagnostic content switch all
Switch 1:
Diagnostics test suite attributes:
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
R/* - Switch will reload after test list completion / NA
P/* - will partition stack / NA
Test Interval Thre-
ID Test Name Attributes day hh:mm:ss.ms shold
==== ================================== ============ =============== =====
1) TestPortAsicStackPortLoopback ---> B*N****I** not configured n/a
2) TestPortAsicLoopback ------------> B*D*X**IR* not configured n/a
3) TestPortAsicCam -----------------> B*D*X**IR* not configured n/a
4) TestPortAsicRingLoopback --------> B*D*X**IR* not configured n/a
5) TestMicRingLoopback -------------> B*D*X**IR* not configured n/a
6) TestPortAsicMem -----------------> B*D*X**IR* not configured n/a
This example shows how to display the running tests in a switch stack:
Switch# show diagnostic status
schedule Display the scheduled diagnostic tests.
status Display the running diagnostic tests.
Release Modification
12.2(40)EX1 This command was introduced.