Specifications

2-508
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show dot1q-tunnel
show dot1q-tunnel
Use the show dot1q-tunnel command in EXEC mode to display information about IEEE 802.1Q tunnel
ports.
show dot1q-tunnel [interface interface-id]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Examples These are examples of output from the show dot1q-tunnel command:
Switch# show dot1q-tunnel
dot1q-tunnel mode LAN Port(s)
-----------------------------
Gi1/0/1
Gi1/0/2
Gi1/0/3
Gi1/0/6
Po2
Switch# show dot1q-tunnel interface gigabitethernet1/0/1
dot1q-tunnel mode LAN Port(s)
-----------------------------
Gi1/0/1
Related Commands
interface interface-id (Optional) Specify the interface for which to display IEEE 802.1Q tunneling
information. Valid interfaces include physical ports and port channels.
Release Modification
12.2(40)EX1 This command was introduced.
Command Description
show vlan dot1q tag native Displays IEEE 802.1Q native VLAN tagging status.
switchport mode dot1q-tunnel Configures an interface as an IEEE 802.1Q tunnel port.