Specifications

2-509
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show dot1x
show dot1x
Use the show dot1x command in EXEC mode to display IEEE 802.1x statistics, administrative status,
and operational status for the switch or for the specified port.
show dot1x [{all [summary] | interface interface-id} [details | statistics]]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines If you do not specify a port, global parameters and a summary appear. If you specify a port, details for
that port appear.
If the port control is configured as unidirectional or bidirectional control and this setting conflicts with
the switch configuration, the show dot1x {all | interface interface-id} privileged EXEC command
output has this information:
ControlDirection = In (Inactive)
Examples This is an example of output from the show dot1x command:
Switch# show dot1x
Sysauthcontrol Enabled
Dot1x Protocol Version 2
Critical Recovery Delay 100
Critical EAPOL Disabled
This is an example of output from the show dot1x all command:
Switch# show dot1x all
Sysauthcontrol Enabled
Dot1x Protocol Version 2
Critical Recovery Delay 100
Critical EAPOL Disabled
Dot1x Info for GigabitEthernet1/0/1
-----------------------------------
PAE = AUTHENTICATOR
PortControl = AUTO
all [summary] (Optional) Display the IEEE 802.1x status for all ports.
interface interface-id (Optional) Display the IEEE 802.1x status for the specified port (including
type, stack member, module, and port number).
details (Optional) Display the IEEE 802.1x interface details.
statistics (Optional) Display IEEE 802.1x statistics for the specified port.
Release Modification
12.2(40)EX1 This command was introduced.