Specifications

2-528
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show flowcontrol
show flowcontrol
Use the show flowcontrol command in EXEC mode to display the flow control status and statistics.
show flowcontrol [interface interface-id | module number]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines Use this command to display the flow control status and statistics on the switch or for a specific interface.
Use the show flowcontrol command to display information about all the switch interfaces. For a
standalone switch, the output from the show flowcontrol command is the same as the output from the
show flowcontrol module number command.
Use the show flowcontrol interface interface-id command to display information about a specific
interface.
Examples This is an example of output from the show flowcontrol command.
Switch# show flowcontrol
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
--------- -------- -------- -------- -------- ------- -------
Gi2/0/1 Unsupp. Unsupp. off off 0 0
Gi2/0/2 desired off off off 0 0
Gi2/0/3 desired off off off 0 0
<output truncated>
This is an example of output from the show flowcontrol interface interface-id command:
Switch# show flowcontrol gigabitethernet2/0/2
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
--------- -------- -------- -------- -------- ------- -------
Gi2/0/2 desired off off off 0 0
Related Commands
interface interface-id (Optional) Display the flow control status and statistics for a specific
interface.
module number (Optional) Display the flow control status and statistics for all interfaces on the
switch or specified stack member.
This option is not available if you have entered a specific interface ID.
Release Modification
12.2(40)EX1 This command was introduced.