Specifications

2-546
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show inventory
show inventory
Use the show inventory command in EXEC mode to display product identification (PID) information
for the hardware.
show inventory [entity-name | raw]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines The command is case sensitive. With no arguments, the show inventory command produces a compact
dump of all identifiable entities that have a product identifier. The compact dump displays the entity
location (slot identity), entity description, and the unique device identifier (UDI) (PID, VID, and SN) of
that entity.
Note If there is no PID, no output appears when you enter the show inventory command.
Examples This is example output from the show inventory command on a switch stack:
Switch# show inventory
NAME: ''1'', DESCR: ''WS-CBS3130G-S-F''
PID: WS-CBS3130G-S-F , VID: V01, SN: FOC1143H02U
NAME: ''Switch 1 - Slot 1'', DESCR: ''TwinGig Converter Module''
PID: 800-27645-01 A , VID: A0 , SN: CAT11115UN3
NAME: ''GigabitEthernet1/0/21'', DESCR: ''10/100/1000BaseTX SFP''
PID: , VID: , SN: AGS1030L1US
NAME: ''2'', DESCR: ''WS-CBS3130X-S''
PID: WS-CBS3130X-S , VID: V01, SN: FOC1137H02C
NAME: ''Switch 2 - Slot 1'', DESCR: ''TwinGig Converter Module''
PID: 800-27645-01 A , VID: A0 , SN: CAT1113545M
NAME: ''Switch 2 - Slot 2'', DESCR: ''TwinGig Converter Module''
PID: 800-27645-01 A , VID: A0 , SN: CAT11115UVM
entity-name (Optional) Display the specified entity. For example, enter the interface
(such as gigabitethernet1/0/1) into which a small form-factor pluggable
(SFP) module is installed.
raw (Optional) Display every entity in the device.
Release Modification
12.2(40)EX1 This command was introduced.