Specifications

2-569
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show ip source binding
show ip source binding
Use the show ip source binding command in EXEC mode to display the IP source bindings on the
switch.
show ip source binding [ip-address] [mac-address] [dhcp-snooping | static] [interface
interface-id] [vlan vlan-id]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines The show ip source binding command output shows the dynamically and statically configured bindings
in the DHCP snooping binding database. Use the show ip dhcp snooping binding privileged EXEC
command to display only the dynamically configured bindings.
Note This command is supported only if your switch is running the IP services feature set.
Examples This is an example of output from the show ip source binding command:
Switch# show ip source binding
MacAddress IpAddress Lease(sec) Type VLAN Interface
-------------- --------------- ---------- ------------- ---- --------------------
00:00:00:0A:00:0B 11.0.0.1 infinite static 10 GigabitEthernet1/0/1
00:00:00:0A:00:0A 11.0.0.2 10000 dhcp-snooping 10 GigabitEthernet1/0/1
Related Commands
ip-address (Optional) Display IP source bindings for a specific IP address.
mac-address (Optional) Display IP source bindings for a specific MAC address.
dhcp-snooping (Optional) Display IP source bindings that were learned by DHCP
snooping.
static (Optional) Display static IP source bindings.
interface interface-id (Optional) Display IP source bindings on a specific interface.
vlan vlan-id (Optional) Display IP source bindings on a specific VLAN.
Release Modification
12.2(40)EX1 This command was introduced.
Command Description
ip dhcp snooping binding Configures the DHCP snooping binding database.
ip source binding Configures static IP source bindings on the switch.