Specifications

2-582

Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference

OL-13270-06

Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands

show ipv6 mld snooping mrouter

Use the show ipv6 mld snooping mrouter command in EXEC mode to display dynamically learned and

manually configured IP version 6 (IPv6) Multicast Listener Discovery (MLD) router ports for the switch

or a VLAN.

show ipv6 mld snooping mrouter [vlan vlan-id]

Syntax Description

Command Modes User EXEC

Privileged EXEC

Command History

Usage Guidelines Use this command to display MLD snooping router ports for the switch or for a specific VLAN.

VLAN numbers 1002 through 1005 are reserved for Token Ring and FDDI VLANs and cannot be used

in MLD snooping.

To configure the dual IPv4 and IPv6 template, enter the sdm prefer dual-ipv4-and-ipv6 {default | vlan)

global configuration command and reload the switch.

Note This command is supported only if you have configured a dual IPv4 and IPv6 Switch Database

Management (SDM) template on the switch.

Examples This is an example of output from the show ipv6 mld snooping mrouter command. It displays snooping

characteristics for all VLANs on the switch that are participating in MLD snooping.

Switch> show ipv6 mld snooping mrouter

Vlan ports

---- -----

2 Gi1/0/11(dynamic)

72 Gi1/0/11(dynamic)

200 Gi1/0/11(dynamic)

This is an example of output from the show ipv6 mld snooping mrouter vlan command. It shows

multicast router ports for a specific VLAN.

Switch> show ipv6 mld snooping mrouter vlan 100

Vlan ports

---- -----

2 Gi1/0/11(dynamic)

vlan vlan-id (Optional) Specify a VLAN; the range is 1 to 1001 and 1006 to 4094.

Release Modification

12.2(40)EX1 This command was introduced.