Specifications

2-586
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show ipv6 route updated
show ipv6 route updated
Use the show ipv6 route updated command in command in EXEC mode to display the current contents
of the IPv6 routing table.
show ipv6 route [protocol] updated [boot-up] {hh:mm | day{month [hh:mm]} [{hh:mm |
day{month [hh:mm]}]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
protocol (Optional) Displays routes for the specified routing protocol using any of
these keywords:
• bgp
• isis
• ospf
• rip
or displays routes for the specified type of route using any of these keywords:
• connected
• local
• static
• interface interface id
boot-up Display the current contents of the IPv6 routing table.
hh:mm Enter the time as a 2-digit number for a 24-hour clock. Make sure to use the
colons (:). For example, enter 13:32
day Enter the day of the month. The range is from 1 to 31.
month Enter the month in upper case or lower case letters. You can enter the full
name of the month, such as January or august, or the first three letters of
the month, such as jan or Aug.
Release Modification
12.2(40)EX1 This command was introduced.