Specifications

2-591
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show lacp
This is an example of output from the show lacp internal command:
Switch> show lacp 1 internal
Flags: S - Device is requesting Slow LACPDUs
F - Device is requesting Fast LACPDUs
A - Device is in Active mode P - Device is in Passive mode
Channel group 1
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
Gi2/0/1 SA bndl 32768 0x3 0x3 0x4 0x3D
Gi2/0/2 SA bndl 32768 0x3 0x3 0x5 0x3D
Table 2-42 describes the fields in the display:
Marker Response Sent and Recv The number of LACP marker response packets sent and received
by a port.
LACPDUs Pkts and Err The number of unknown and illegal packets received by LACP
for a port.
Table 2-41 show lacp counters Field Descriptions (continued)
Field Description
Table 2-42 show lacp internal Field Descriptions
Field Description
State State of the specific port. These are the allowed values:
• – —Port is in an unknown state.
• bndl—Port is attached to an aggregator and bundled with
other ports.
• susp—Port is in a suspended state; it is not attached to any
aggregator.
• hot-sby—Port is in a hot-standby state.
• indiv—Port is incapable of bundling with any other port.
• indep—Port is in an independent state (not bundled but able
to switch data traffic. In this case, LACP is not running on
the partner port).
• down—Port is down.
LACP Port Priority Port priority setting. LACP uses the port priority to put ports s
in standby mode when there is a hardware limitation that
prevents all compatible ports from aggregating.
Admin Key Administrative key assigned to this port. LACP automatically
generates an administrative key value as a hexadecimal number.
The administrative key defines the ability of a port to aggregate
with other ports. A port’s ability to aggregate with other ports is
determined by the port physical characteristics (for example,
data rate and duplex capability) and configuration restrictions
that you establish.
Oper Key Runtime operational key that is being used by this port. LACP
automatically generates this value as a hexadecimal number.