Specifications

2-603
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show mac access-group
show mac access-group
Use the show mac access-group command in EXEC mode to display the MAC access control lists
(ACLs) configured for an interface or a switch.
show mac access-group [interface interface-id]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Examples This is an example of output from the show mac-access group command in EXEC mode. In this display,
port 2 has the MAC access list macl_e1 applied; no MAC ACLs are applied to other interfaces.
Switch> show mac access-group
Interface GigabitEthernet1/0/1:
Inbound access-list is not set
Interface GigabitEthernet1/0/2:
Inbound access-list is macl_e1
Interface GigabitEthernet1/0/3:
Inbound access-list is not set
Interface GigabitEthernet1/0/4:
Inbound access-list is not set
<output truncated>
This is an example of output from the show mac access-group interface gigabitethernet1/0/1
command:
Switch# show mac access-group interface gigabitethernet1/0/1
Interface GigabitEthernet1/0/1:
Inbound access-list is macl_e1
Related Commands
interface interface-id (Optional) Display the MAC ACLs configured on a specific interface. Valid
interfaces are physical ports and port channels; the port-channel range is 1
to 64 (available only in privileged EXEC mode).
Release Modification
12.2(40)EX1 This command was introduced.
Command Description
mac access-group Applies a MAC access group to an interface.