Specifications

2-610
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show mac address-table dynamic
show mac address-table dynamic
Use the show mac address-table dynamic command in EXEC mode to display only dynamic MAC
address table entries.
show mac address-table dynamic [address mac-address] [interface interface-id] [vlan vlan-id]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Examples This is an example of output from the show mac address-table dynamic command:
Switch> show mac address-table dynamic
Mac Address Table
------------------------------------------
Vlan Mac Address Type Ports
---- ----------- ---- -----
1 0030.b635.7862 DYNAMIC Gi6/0/2
1 00b0.6496.2741 DYNAMIC Gi6/0/2
Total Mac Addresses for this criterion: 2
Related Commands
address mac-address (Optional) Specify a 48-bit MAC address; the valid format is H.H.H
(available in privileged EXEC mode only).
interface interface-id (Optional) Specify an interface to match; valid interfaces include physical
ports and port channels.
vlan vlan-id (Optional) Display entries for a specific VLAN; the range is 1 to 4094.
Release Modification
12.2(40)EX1 This command was introduced.
Command Description
clear mac address-table dynamic Deletes from the MAC address table a specific dynamic
address, all dynamic addresses on a particular interface, or all
dynamic addresses on a particular VLAN.
show mac address-table address Displays MAC address table information for the specified
MAC address.
show mac address-table aging-time Displays the aging time in all VLANs or the specified VLAN.
show mac address-table count Displays the number of addresses present in all VLANs or the
specified VLAN.
show mac address-table interface Displays the MAC address table information for the specified
interface.