Specifications

2-615
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show mac address-table notification
show mac address-table notification
Use the show mac address-table notification command in EXEC mode to display the MAC address
notification settings for all interfaces or the specified interface.
show mac address-table notification {change [interface [interface-id] | mac-move | threshold}
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines Use the show mac address-table notification command without any keywords to display whether the
feature is enabled or disabled, the MAC notification interval, the maximum number of entries allowed
in the history table, and the history table contents.
Use the interface keyword to display the flags for all interfaces. If the interface-id is included, only the
flags for that interface appear.
Examples This is an example of output from the show mac address-table notification change command:
Switch> show mac address-table notification change
MAC Notification Feature is Enabled on the switch
Interval between Notification Traps : 60 secs
Number of MAC Addresses Added : 4
Number of MAC Addresses Removed : 4
Number of Notifications sent to NMS : 3
Maximum Number of entries configured in History Table : 100
Current History Table Length : 3
MAC Notification Traps are Enabled
History Table contents
----------------------
History Index 0, Entry Timestamp 1032254, Despatch Timestamp 1032254
MAC Changed Message :
Operation: Added Vlan: 2 MAC Addr: 0000.0000.0001 Module: 0 Port: 1
History Index 1, Entry Timestamp 1038254, Despatch Timestamp 1038254
change Display the MAC change notification feature parameters and the history
table.
interface (Optional) Display information for all interfaces. Valid interfaces include
physical ports and port channels.
interface-id (Optional) Display information for the specified interface. Valid interfaces
include physical ports and port channels.
mac-move Display status for MAC address move notifications.
threshold Display status for MAC-address table threshold monitoring.
Release Modification
12.2(40)EX1 This command was introduced.