Specifications

2-624
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show mls qos interface
show mls qos interface
Use the show mls qos interface command in EXEC mode to display quality of service (QoS)
information at the port level.
show mls qos interface [interface-id] [buffers | queueing | statistics]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines Though visible in the command-line help string, the policers keyword is not supported.
Examples This is an example of output from the show mls qos interface interface-id command when VLAN-based
QoS is enabled:
Switch> show mls qos interface gigabitethernet1/0/1
GigabitEthernet1/0/1
trust state:not trusted
trust mode:not trusted
trust enabled flag:ena
COS override:dis
default COS:0
DSCP Mutation Map:Default DSCP Mutation Map
Trust device:none
qos mode:vlan-based
This is an example of output from the show mls qos interface interface-id command when VLAN-based
QoS is disabled:
Switch> show mls qos interface gigabitethernet1/0/2
GigabitEthernet1/0/2
trust state:not trusted
trust mode:not trusted
trust enabled flag:ena
COS override:dis
interface-id (Optional) Display QoS information for the specified port. Valid interfaces
include physical ports.
buffers (Optional) Display the buffer allocation among the queues.
queueing (Optional) Display the queueing strategy (shared or shaped) and the weights
corresponding to the queues.
statistics (Optional) Display statistics for sent and received Differentiated Services Code
Points (DSCPs) and class of service (CoS) values, the number of packets
enqueued or dropped per egress queue, and the number of in-profile and
out-of-profile packets for each policer.
Release Modification
12.2(40)EX1 This command was introduced.