Specifications

2-637
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show mvr members
show mvr members
Use the show mvr members privileged EXEC command to display all receiver and source ports that are
currently members of an IP multicast group.
show mvr members [ip-address]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines The show mvr members command applies to receiver and source ports. For MVR-compatible mode, all
source ports are members of all multicast groups.
Examples This is an example of output from the show mvr members command:
Switch# show mvr members
MVR Group IP Status Members
------------ ------ -------
239.255.0.1 ACTIVE Gi1/0/1(d), Gi1/0/5(s)
239.255.0.2 INACTIVE None
239.255.0.3 INACTIVE None
239.255.0.4 INACTIVE None
239.255.0.5 INACTIVE None
239.255.0.6 INACTIVE None
239.255.0.7 INACTIVE None
239.255.0.8 INACTIVE None
239.255.0.9 INACTIVE None
239.255.0.10 INACTIVE None
<output truncated>
This is an example of output from the show mvr members ip-address command. It displays the
members of the IP multicast group with that address:
Switch# show mvr members 239.255.0.2
239.255.003.--22 ACTIVE Gi1//1(d), Gi1/0/2(d), Gi1/0/3(d),
Gi1/0/4(d), Gi1/0/5(s)
Related Commands
ip-address (Optional) The IP multicast address. If the address is entered, all receiver and
source ports that are members of the multicast group appear. If no address is
entered, all members of all Multicast VLAN Registration (MVR) groups are
listed. If a group has no members, the group is listed as Inactive.
Release Modification
12.2(40)EX1 This command was introduced.