Specifications

2-643
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show pagp
show pagp
Use the show pagp command in EXEC mode to display Port Aggregation Protocol (PAgP)
channel-group information.
show pagp [channel-group-number] {counters | dual-active | internal | neighbor} ]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines You can enter any show pagp command to display the active channel-group information. To display the
nonactive information, enter the show pagp command with a channel-group number.
Examples This is an example of output from the show pagp 1 counters command:
Switch> show pagp 1 counters
Information Flush
Port Sent Recv Sent Recv
--------------------------------------
Channel group: 1
Gi1/0/1 45 42 0 0
Gi1/0/2 45 41 0 0
channel-group-number (Optional) Number of the channel group. The range is 1 to 64.
counters Display traffic information.
dual-active Display the dual-active status.
internal Display internal information.
neighbor Display neighbor information.
Release Modification
12.2(40)EX1 This command was introduced.
12.2(46)SE The dual-active keyword was added.