Specifications

2-665
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show switch
show switch
Use the show switch command in EXEC mode to display information related to the stack member or the
switch stack.
show switch [stack-member-number | chassis-mgmt | detail | neighbors | stack-ports [summary]
| stack-ring activity [detail]]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines
This command displays these states:
• Waiting—A switch is booting up and waiting for communication from other switches in the stack.
The switch has not yet determined whether or not it is a stack master.
Stack members not participating in a stack master election remain in the waiting state until the stack
master is elected and ready.
• Initializing—A switch has determined whether its stack master status. If it is not the stack master,
it is receiving its system- and interface-level configuration from the stack master and loading it.
• Ready—The member has completed loading the system- and interface-level configurations and can
forward traffic.
• Master Re-Init—The state immediately after a master re-election and a different member is elected
master. The new master is re-initializing its configuration. This state applies only to the new master.
stack-member-number (Optional) Display information for the specified stack member. The range
is 1 to 9.
chassis-mgmt (Optional) Display information about the enclosures in which the stack
members are installed.
detail (Optional) Display detailed information about the stack ring.
neighbors (Optional) Display the neighbors for the entire switch stack.
stack-ports [summary] (Optional) Display port information for the entire switch stack. Use the
summary keyword to display the stack cable length, the stack link status,
and the loopback status.
stack-ring activity
[detail]
(Optional) Display the number of frames per stack member that are sent to
the stack ring. Use the detail keyword to display the ASIC, the receive
queues, and the number of frames per stack member that are sent to the
stack ring.
Release Modification
12.2(40)EX1 This command was introduced.
12.2(50)SE The display was expanded to include stack cable, link, and loopback
information. The stack ports [summary] keywords were added.