Specifications

2-677
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show vlan
In the show vlan private-vlan type command output, a type displayed as normal means a VLAN that
has a private VLAN association but is not part of the private VLAN. For example, if you define and
associate two VLANs as primary and secondary VLANs and then delete the secondary VLAN
configuration without removing the association from the primary VLAN, the VLAN that was the
secondary VLAN is shown as normal in the display. In the show vlan private-vlan output, the primary
and secondary VLAN pair is shown as non-operational.
Note Though visible in the command-line help string, the ifindex keyword is not supported.
Examples This is an example of output from the show vlan command. Table 2-47 describes the fields in the display.
Switch> show vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi1/0/1, Gi1/0/2, Gi1/0/3
Gi1/0/4, Gi1/0/5, Gi1/0/6
Gi1/0/7, Gi1/0/8, Gi1/0/9
Gi1/0/10, Gi1/0/11, Gi1/0/12
Gi1/0/13, Gi1/0/14
1 default active Gi2/0/1, Gi2/0/2, Gi2/0/3, Gi2/0/4
Gi2/0/5, Gi2/0/6, Gi2/0/7, Gi2/0/8
Gi2/0/9, Gi2/0/10, Gi2/0/11, Gi2/0/12
Gi2/0/13, Gi2/0/14
<output truncated>
2 VLAN0002 active
3 VLAN0003 active
<output truncated>
1000 VLAN1000 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 1002 1003
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
<output truncated>
1005 trnet 101005 1500 - - - ibm - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------ --------- ----------------- ------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
20 25 isolated Gi1/0/1,Gi3/0/1
20 30 community Gi1/0/1, Gi3/0/1
20 35 community Gi1/0/1, Gi3/0/1
<output truncated>