Specifications

2-688
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13270-06
Chapter Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
show vtp
This is an example of output from the show vtp status command for a switch running VTP version 3:
Switch> show vtp status
VTP Version capable : 1 to 3
VTP version running : 3
VTP Domain Name : Cisco
VTP Pruning Mode : Disabled
VTP Traps Generation : Disabled
Device ID : 0021.1bcd.c700
Feature VLAN:
--------------
VTP Operating Mode : Server
Number of existing VLANs : 7
Number of existing extended VLANs : 0
Configuration Revision : 0
Primary ID : 0000.0000.0000
Primary Description :
MD5 digest : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Feature MST:
--------------
VTP Operating Mode : Client
Configuration Revision : 0
Primary ID : 0000.0000.0000
Primary Description :
MD5 digest : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Feature UNKNOWN:
--------------
VTP Operating Mode : Transparent
VTP Domain Name Name that identifies the administrative domain for the switch.
VTP Pruning Mode Displays whether pruning is enabled or disabled. Enabling pruning on a
VTP server enables pruning for the entire management domain. Pruning
restricts flooded traffic to those trunk links that the traffic must use to
access the appropriate network devices.
VTP V2 Mode Displays if VTP Version 2 mode is enabled. All VTP Version 2 switches
operate in Version 1 mode by default. Each VTP switch automatically
detects the capabilities of all the other VTP devices. A network of VTP
devices should be configured to Version 2 only if all VTP switches in the
network can operate in Version 2 mode.
VTP Traps Generation Displays whether VTP traps are sent to a network management station.
MD5 Digest A 16-byte checksum of the VTP configuration.
Configuration Last
Modified
Displays the date and time of the last configuration modification.
Displays the IP address of the switch that caused the configuration change
to the database.
Table 2-50 show vtp status Field Descriptions (continued)
Field Description