User guide

4-39
Configuration Guide for Cisco DSLAMs with NI-2
OL-2074-03
Chapter 4 Configuring Digital Subscriber Lines
Setting DSL Profile Parameters
IDSL profile parameters
Bitrate: 128 kbit/sec
Encapsulation: llc-ppp
Frame Relay parameters:
UPC intent: pass
Bc default: 32768 bytes
LMI type: cisco
lmi-n392dce: 2 events
lmi-n393dce: 2 events
lmi-t392dce: 15 seconds
dsl profile austin:
Link Traps Enabled: NO
Alarms Enabled: NO
ATM Payload Scrambling: Enabled
DMT profile parameters
Maximum Bitrates:
Maximum Bitrates:
Interleave Path: downstream: 640 kb/s, upstream: 128 kb/s
Fast Path: downstream: 0 kb/s, upstream: 0 kb/s
Minimum Bitrates:
Interleave Path: downstream: 0 kb/s, upstream: 0 kb/s
Fast Path: downstream: 0 kb/s, upstream: 0 kb/s
Margin: downstream: 6 dB, upstream: 6 dB
Interleaving Delay: downstream: 16000 usecs, upstream: 16000 usecs
Check Bytes (FEC):
Interleave Path: downstream: 16, upstream: 16
Fast Path: downstream: 0, upstream: 0
R-S Codeword Size: downstream: auto, upstream: auto
Trellis Coding: Disabled
Overhead Framing: Mode 3
Operating Mode: Automatic
Training Mode: Quick
Minrate blocking: Disabled
SNR Monitoring: Disabled
SDSL profile parameters
Maximum Bitrates: 784 kbps
SHDSL profile parameters
Maximum Bitrates: 776 kbps
SNR margin threshold: 3 dB
SNR margin target: 0 dB
SNR margin min: 0 dB
Masktype: symmetric
Annex: auto
Rate mode: fixed
CAP profile parameters
Maximum Bitrates: downstream: 640 kb/s, upstream: 91 kb/s
Minimum Bitrates: downstream: 0 kb/s, upstream: 0 kb/s
Margin: downstream: 3 dB, upstream: 6 dB
PSDM: downstream: -40 dBm/Hz, upstream: -38 dBm/Hz
Interleaving Delay: Long (Reed-Solomon enabled)
136K Baud DS Rates: Enabled
68K Baud US Rates: Disabled
17K Baud US Rates: Disabled
CPE Signature: 0