Quick Start Guide

21
Quick Start Guide: Cisco 521 Wireless Express Access Point
Step 9 If you need additional security, you can secure the access point to a
nearby immovable object using a Kensington lock and security
cable.
Step 10 Verify that the access point is operating properly and then replace
the ceiling tile.
Mounting on a Network Cable Box
Follow these steps to mount the access point on a network cable box.
Step 1 Position the mounting plate over the network cable box and align
the two mounting holes (labeled X) with the network cable box
holes.
Step 2 Hold the mounting plate and insert a 6 x 32 x 1/4 in. pan head screw
into each of the two X mounting holes and tighten.
Step 3 Pull the access point cables out of the network box until there is
about 1 ft. of exposed cables protruding from the box.
Step 4 Attach the access point to the mounting plate.
Step 5 Connect the cables to the access point.