Specifications

12-46
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
clear conf {all | system}
clear conf {all | system}
To return certain configuration settings to factory defaults, use the clear conf {all | system} command.
clear conf {all | system} password
Syntax Description
Defaults None.
Command Modes Administrator.
Command History
Usage Guidelines System configuration settings include:
• The management and HA interface IP addresses
• Configuration information for Fibre Channel interfaces
• Saved zone configuration information
• Domain name servers
• NTP server and time zone information
• SNMP information
• Administrator and Monitor passwords, and administrator contact information
• AAA authentication information
• VLAN and VTP information
Issuing the clear conf command with either the system or all keyword causes the storage router to
reboot.
Deleting system configuration makes the storage router unavailable to Telnet or web-based GUI sessions
until the management interface is reconfigured with an IP address via a console connection. See
Chapter 2, “First-Time Configuration,” for more information about initial system configuration.
all Remove all storage router configuration information, including system
configuration settings, saved configuration files, SCSI routing and FCIP
instances, access lists, and cluster configuration settings.
system Remove all system configuration settings, SCSI routing instances, access
lists and cluster configuration settings. Saved configuration files will be
retained.
password The Administrator mode password.
Release Modification
3.2.1 This command was introduced.