Specifications

12-61
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
clock timezone
clock timezone
To specify the time zone for the storage router, use the clock timezone command.
clock timezone {string |?}
Syntax Description
Defaults None.
Command Modes Administrator.
Command History
Usage Guidelines Unless you specify the time zone, the clock setting is assumed to be in Universal time, also known as
Greenwich Mean Time (GMT).
You can use the setup time wizard to select a time zone, set the clock and date, and identify an NTP
server for the storage router.
To use the clock timezone command, you must know the appropriate time zone string. Use the “?” to
display a list of valid time zone strings.
Examples The following example sets the storage router time zone to US/Mountain:
[SN5428-2A]# clock timezone US/Mountain
Related Commands
string A character string representing the time zone of the storage router. For
example, America/Chicago or Europe/Amsterdam.
? Display a list of all valid time zones. Use any time zone in this list for the
string parameter to set the storage router to that time zone.
Release Modification
3.2.1 This command was introduced.
Command Description
clock set Set the storage router system clock.
ntp peer Specify the name or IP address of the NTP server with which the storage
router will synchronize date and time.
setup time Run the wizard to configure the system date and time.
show clock Display the current system date and time, including the system time zone.