Specifications

12-78
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
debug scsirouter
debug scsirouter
To enable trace facilities for debugging SCSI routing instances, use the debug scsirouter command. To
disable debugging, use the no form of this command.
debug scsirouter name scsitrace
no debug scsirouter name scsitrace
Syntax Description
Defaults All trace facilities are enabled by default.
Command Modes Administrator.
Command History
Usage Guidelines When enabled at this level, debug tracing will trace traffic to and from all targets associated with the
named SCSI routing instance. Use the show debug scsirouter command to view the trace buffer output.
Examples The following example enables debug tracing facilities for a SCSI routing instance named foo:
[SN5428-2A]# debug scsirouter foo scsitrace
Related Commands
name The name of the SCSI routing instance to be debugged.
scsitrace Keyword indicating tracing services will be enabled.
Release Modification
3.2.1 This command was introduced.
Command Description
debug aaa Enable debugging for AAA authentication services.
debug scsirouter
iscsitrace
Enable iSCSI trace facilities for debugging connections to and from the
specified SCSI routing instance.
debug scsirouter
target
Enable debugging for a specific SCSI routing instance target and LUN
combination.
show debug scsirouter Display trace buffer output.