Specifications

12-90
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
delete logging
Note The debug notification level should be used for specific troubleshooting purposes only. System
performance and HA behavior may be adversely affected by logging at the debug notification level.
Each facility can have up to eight notification levels. Each facility and notification level pair can have
up to seven destinations. Table 12-5 describes the available facility names.
Table 12-4 Logging Level Notification Levels and Corresponding Numbers
Notification Level Level Number Description
emergency 0 System unusable
alert 1 Immediate action needed
critical 2 Critical conditions
error 3 Error conditions
warning 4 Non-fatal warning conditions
notice 5 Normal but significant conditions
info 6 Informational messages only
debug 7 Information for troubleshooting purposes
Table 12-5 Logging Level Facilities
Facility Name Description
all All facilities.
AUTH AAA authentication.
CDP Cisco Discovery Protocol.
CONF Configuration functions.
FC Fibre Channel interfaces.
FCIP FCIP functions.
GE Gigabit Ethernet interfaces.
HA High availability cluster functions.
IF Interface manager.
INVALID Generic functions.
IP IP functions.
ISCSI iSCSI functions.
MON Hardware monitor.
SLP Service Location Protocol service functions.
SNMP Simple Network Management Protocol.
SYSLOG Syslog functions.
UI User interface functions.
VTP VTP and VLAN functions.