Specifications

12-125
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcip destination tcpclient
Note When configuring an FCIP instance, you must configure the network interface before you configure the
peer destination and protocol.
Examples The following example configures the FCIP instance named fcip2 with a destination named lucky2 at IP
address 10.1.4.32, using TCP/IP connection protocol. The FCIP instance is configured as a TCP client,
and will initiate the TCP connection to the destination.
[SN5428-2A]# fcip fcip2 destination lucky2 tcpclient 10.1.4.32
Related Commands Command Description
fcip Create an FCIP instance.
fcip destination config Configure operational parameters for the named FCIP instance.
fcip networkif Assign a Gigabit Ethernet interface and IP address to the named FCIP
instance.
show fcip Display configuration and operational information for the named FCIP
instance.