Specifications

12-136
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcswitch devlog enable
fcswitch devlog enable
To start development logging for the SN 5428-2 Storage Router integrated Fibre Channel (FC) switch
component, use the fcswitch devlog enable command. To stop development logging, use the no form of
this command.
fcswitch devlog enable
no fcswitch devlog enable
Syntax Description This command has no arguments or keywords.
Defaults Development logging is stopped.
Command Modes Administrator.
Command History
Usage Guidelines The fcswitch devlog enable command is designed for debug purposes, and should be used under the
guidance of a Cisco Technical Support professional.
Examples The following example starts development logging for the FC switch component and limits the switch
development log file to informational messages only from the management application and the class 2
frame handler:
[SN5428-2A]# fcswitch devlog components MgmtApp Fc2
[SN5428-2A]# fcswitch devlog level info
[SN5428-2A]# fcswitch devlog enable
Related Commands
Release Modification
3.2.1 This command was introduced.
Command Description
clear fcswitch Clear the switch log files of all entries or clear stored zoning configuration
information.
fcswitch devlog Specify logging parameters for the switch development log file.
fcswitch log interface Restrict the integrated FC switch logging to information related to a specific
FC interface.
show debug fcswitch Display internal FC interface parameters, including switch log entries.