Specifications

12-140
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcswitch dstov
fcswitch dstov
To specify the amount of time the storage router is to wait for Fibre Channel (FC) Distributed Services,
use the fcswitch dstov command.
fcswitch dstov {nn | default}
Syntax Description
Defaults The default Distributed Services timeout value is 5000 milliseconds.
Command Modes Administrator.
Command History
Usage Guidelines Use this command to specify the length of time the storage router should wait for FC Distributed
Services, such as the Management Server or Name Server, before returning an error.
Use the default keyword to return the Distributed Services timeout value to 5000 milliseconds.
Examples The following example sets the Distributed Services timeout value to 7500 milliseconds:
[SN5428-2A]# fcswitch dstov 7500
The following example resets the Distributed Services timeout value to the default of 5000 milliseconds:
[SN5428-2A]# fcswitch dstov default
Related Commands
nn The Distributed Services timeout value, in milliseconds.
default Keyword, indicating the storage router is to wait 5000 milliseconds for
Fibre Channel Distributed Services.
Release Modification
3.2.1 This command was introduced.
Command Description
fcswitch edtov Specify an error detect timeout value for all Fibre Channel interfaces.
fcswitch enable Enable all FC interfaces.
fcswitch fstov Specify the fabric stability timeout value.
fcswitch ratov Specify a Fibre Channel resource allocation timeout value for the storage
router.
show fcswitch Display global configuration information for storage router FC interfaces.