Specifications

12-300
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
scsirouter primary
Examples The following command designates the SN 5428-2 LabRouter1 as the storage router on which the SCSI
routing instance named foo will always, under normal conditions, run.
[SN5428-2A]# scsirouter foo primary LabRouter1
Related Commands Command Description
clear scsirouter
primary
Remove the storage router configured as the primary for the named SCSI
routing instance.
delete scsirouter Delete the named SCSI routing instance or the specified element of the
SCSI routing instance.
restore scsirouter Restore the named SCSI routing instance from the named configuration file.
save scsirouter Save configuration information for the named SCSI routing instance.
scsirouter Create a SCSI routing instance.
scsirouter enable Stop or start the named SCSI routing instance.
scsirouter failover Add the storage router to the HA failover list for the specified SCSI routing
instance.
scsirouter serverif Assign a Gigabit Ethernet interface, IP address, and optionally a VLAN to
the named SCSI routing instance.
setup scsi Run the wizard to configure a SCSI routing instance.
show scsirouter Display configuration and operational information for the named SCSI
routing instance.