Specifications

12-352
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
setup iscsi-port
Do you want to change the iSCSI port number?[yes/no (no)] yes
##########################
## Changing iSCSI port ##
##########################
Now, you will need to enter a new iSCSI port number. The new port
will be used as the iSCSI server listen port. Make sure the new
port is not used by other applications in your network environment.
New port number ? [nn] 5003
#########################################################
## Please confirm that you want to change iSCSI port ##
#########################################################
iSCSI port configuration settings will be saved.
The system will REBOOT if you answer "yes".
** Enter CTRL-C to cancel. **
Proceed to change the iSCSI port?[yes/no (no)] yes
After confirming your intentions, the storage router automatically reboots.
Related Commands Command Description
clear conf Return most configuration settings to factory defaults.
setup Run the setup configuration wizard.
setup access Run the wizard to configure Monitor mode and Administrator mode
passwords.
setup fcip Run the wizard to manually configure FCIP instances.
setup cluster Change the configuration of the high availability environment.
setup mgmt Run the wizard to configure the management interface.
setup netmgmt Run the wizard to configure network management.
setup scsi Run the wizard to configure a SCSI routing instance.
setup time Run the wizard to configure the system date and time.