Specifications

12-392
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show cdp traffic
Related Commands
Encaps failed The number of times CDP failed to send advertisements on an interface
because of a failure caused by the bridge port of the storage router.
No memory The number of times the storage router did not have sufficient memory to
store the CDP advertisements in the advertisement cache table when the
storage router attempted to assemble advertisement packets for
transmission or to parse them when receiving them.
Invalid packet The number of invalid CDP advertisements received and sent by the
storage router.
Fragmented The number of times fragments or portions of a single CDP
advertisement were received by the storage router instead of the complete
advertisement.
CDP version 1
advertisements output
The number of CDP version 1 advertisements sent by the storage router.
Input The number of CDP version 1 advertisements received by the storage
router.
CDP version 2
advertisements output
The number of CDP version 2 advertisements sent by the storage router.
Input The number of CDP version 2 advertisements received by the storage
router.
Table 12-24 Description of Fields in the “show cdp traffic” Command Output (continued)
Field Description
Command Description
cdp enable Enable or disable CDP on the SN 5428-2 Storage Router.
cdp holdtime Specify the amount of time the receiving device should hold a CDP packet
from the SN 5428-2 Storage Router before discarding it.
cdp interface Switch CDP on or off for the specified interface.
cdp timer Specify the amount of time between transmissions of CDP packets from the
SN 5428-2 Storage Router.
show cdp Display global CDP configuration information for the storage router.
show cdp entry Display information about a specific neighbor device listed in the CDP
neighbors table.
show cdp interface Display information about the interfaces on which CDP is enabled.
show cdp neighbors Display detailed information about neighboring devices discovered using
CDP.