Specifications

12-487
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show slp
show slp
To display the status of the Service Location Protocol (SLP) service and the interface address where the
SLP service is listening for incoming SLP service requests, use the show slp command.
show slp
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Administrator or Monitor
Command History
Usage Guidelines Use this command to display the operational status of the SLP service. The SLP listens on all configured
IP interfaces.
Examples The following is example output from the show slp command:
[SN5428-4A]# show slp
SLP is RUNNING
Listening interfaces:
127.0.0.1 TCP LISTEN
10.1.40.116 TCP LISTEN UDP MULTICAST UDP UNICAST
10.1.20.116 TCP LISTEN UDP MULTICAST UDP UNICAST
Related Commands
Release Modification
3.2.1 This command was introduced.
Command Description
scsirouter slp enable Enable the advertisement of the targets of the named SCSI routing instance
with the SLP service.
slp findattrs Discover the attributes of a specific SLP registered service.
slp findsrvs Locate a SLP registered service of a specific type on the local subnet.
slp findsrvtypes Discover all SLP registered service types on the local subnet.