Specifications

12-524
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
slp findsrvtypes
slp findsrvtypes
To discover all Service Location Protocol (SLP) registered services on the local subnet where the
SN 5428-2 Storage Router is located, use the slp findsrvtypes command.
slp findsrvtypes
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines Use this command to invoke an SLP user agent tool which looks for SLP registered services on the local
subnet. If any SLP services are found, a list of the service types and URLs displays. If SCSI routing
instances have SLP enabled and have targets advertised with SLP, the display lists an available SLP
service of type iscsi:target.
Examples The following is example output from the slp findsrvtypes command:
[SN5428-2A]# slp findsrvtypes
service:iscsi:target
Related Commands
Release Modification
3.2.1 This command was introduced.
Command Description
scsirouter slp enable Enable the advertisement of the targets of the named SCSI routing instance
with the SLP service.
show slp Display the status of the SLP service and the interface address where the
SLP service is listening for incoming SLP service requests.
slp findattrs Discover the attributes of a specific SLP registered service.
slp findsrvs Locate a SLP registered service of a specific type on the local subnet.