System information

12-134
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcswitch devlog
fcswitch devlog
To specify the logging parameters for the SN 5428-2 Storage Router integrated Fibre Channel (FC)
switch component development log file, use the fcswitch devlog command.
fcswitch devlog components component1 [component2...]
fcswitch devlog level notification-level
Syntax Description
Defaults No components or notification level are configured. Development logging for the SN 5428-2 Storage
Router integrated FC switch component is disabled.
Command Modes Administrator.
Command History
Usage Guidelines The fcswitch devlog command is designed for debug purposes, and should be used under the guidance
of a Cisco Technical Support professional.
After logging is enabled, use this command to limit the amount of information recorded in the switch
development log by component and by notification level. To stop all logging for all components, set the
notification level to none. Use the fcswitch devlog enable command to enable development logging.
components
component1
[component2...]
At least one of the components described in Table 12-6.
level notification-level Limit logging to messages of a specified level or lower. See Table 12-7 in
the Usage Guidelines section for a list of valid names that can be used for
the notification-level argument.
Release Modification
3.2.1 This command was introduced.
Table 12-6 fcswitch devlog components
Component Description
Cmon Monitors internal chassis components and
applications.
Diag Handles online testing and other diagnostic tasks.
Ds Data services repository for all switch data.
Fc2 Class 2 frame handler.
MgmtApp Manages the user interface and internal
configuration for the switch.
PortApp Manages the switch ports.