System information

12-141
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcswitch edtov
fcswitch edtov
To specify an error detect timeout value for all Fibre Channel (FC) interfaces, use the fcswitch edtov
command.
fcswitch edtov {nn |default}
Syntax Description
Defaults The default error detect timeout value is 2000 milliseconds.
Command Modes Administrator.
Command History
Usage Guidelines The error detect timeout value is the amount of time the FC port is to wait for all errors to clear. This
value applies to all FC interfaces in the storage router.
Error detect timeout values should be the same for all SN 5428-2 Storage Routers or switches in the
fabric.
Examples The following example sets the error detect timeout value to 4000 milliseconds:
[SN5428-2A]# fcswitch edtov 4000
The following example resets the error detect timeout value to the default of 2000 milliseconds:
[SN5428-2A]# fcswitch edtov default
Related Commands
nn The amount of time a port is to wait for errors to clear, in milliseconds.
default Keyword, indicating the port is to wait 2000 milliseconds for errors to clear.
Release Modification
3.2.1 This command was introduced.
Command Description
fcswitch dstov Specify the amount of time the storage router is to wait for Fibre Channel
Distributed Services.
fcswitch enable Enable all FC interfaces.
fcswitch fstov Specify the fabric stability timeout value.
fcswitch ratov Specify a Fibre Channel resource allocation timeout value for the storage
router.
show fcswitch Display global configuration information for storage router FC interfaces.