System information

12-151
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcswitch syslog enable
fcswitch syslog enable
To start system logging for the SN 5428-2 Storage Router integrated Fibre Channel (FC) switch
component, use the fcswitch syslog enable command. To stop system logging, use the no form of this
command.
fcswitch syslog enable
no fcswitch syslog enable
Syntax Description This command has no arguments or keywords.
Defaults System logging for the integrated FC switch component is started, by default.
Command Modes Administrator.
Command History
Usage Guidelines The fcswitch syslog enable command is designed for debug purposes, and should be used under the
guidance of a Cisco Technical Support professional.
Examples The following example stops system logging for the integrated FC switch component. When system
logging is started, logging will continue based on the existing component and notification level settings.
[SN5428-2A]# no fcswitch syslog enable
Related Commands
Release Modification
3.2.1 This command was introduced.
Command Description
clear fcswitch Clear the switch log files of all entries or clear stored zoning configuration
information.
fcswitch log interface Restrict the integrated FC switch logging to information related to a specific
FC interface.
fcswitch syslog Specify logging parameters for the switch system log file.
show debug fcswitch Display internal FC interface parameters, including switch log entries.