System information

12-180

Cisco SN 5428-2 Storage Router Software Configuration Guide

78-15471-01

Chapter 12 Command Line Interface Reference

interface fc? ms-enable

To enable GS-3 management server commands for the specified Fibre Channel (FC) interface, use the

interface fc? ms-enable command. To disable GS-3 management server commands, use the no form of

this command.

interface fc? ms-enable enable

no interface fc? ms-enable enable

Syntax Description

Defaults GS-3 management server commands are enabled on all FC interfaces.

Command Modes Administrator.

Command History

Usage Guidelines Enabling GS-3 management server commands for the FC interface allows in-band management of the

SN 5428-2 Storage Router integrated FC switch component. GS-3 management server commands must

be enabled if you want to use storage management tools to provide in-band management of the integrated

FC switch component along with other switches in the fabric.

Use the no form of this command to disable in-band management on the specified FC interface.

Examples The following example disables GS-3 management server commands for fc8:

[SN5428-2A]# no interface fc8 ms-enable enable

Related Commands

fc? The name of the FC interface for which you are setting this parameter. Valid

values are fc1 through fc8. When you type the interface fc? command, the

CLI lists the interfaces available. You cannot specify a nonexistent

interface.

enable Keyword, required to enable GS-3 management server commands for the

named FC interface.

Release Modification

3.2.1 This command was introduced.

Command Description

interface fc? default Return the named FC interface to its default operational characteristics.

show fcswitch Display global configuration information for storage router 2 FC interfaces.

show interface Display operational and configuration information for the specified

interface or all interfaces.