System information

12-227
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
logout
logout
To terminate the current CLI management session, use the logout command.
logout
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines
• If you are connected to the storage router in Administrator mode or Monitor mode via a Telnet or
SSH session, the logout command terminates the CLI management session. No CLI commands can
be issued until you log in again.
• If you are connected to the storage router in Administrator mode via the console interface, the logout
command returns the session to Monitor mode (like the exit command).
• If you are connected to the storage router in Monitor mode via the console interface, the logout
command has no effect. If console passwords are enabled, you are immediately prompted for the
Monitor mode password.
Related Commands
Release Modification
3.2.1 This command was introduced.
Command Description
enable Enter Administrator mode.
exit Leave Administrator mode and enter Monitor mode.