System information

12-314
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
scsirouter target description
Related Commands Command Description
accesslist Create an access list entity.
accesslist A.B.C.D/bits Add IP addresses to an access list.
accesslist
chap-username
Add CHAP user name entries to an access list.
accesslist iscsi-name Add iSCSI Name entries to an access list.
delete accesslist Delete a specific access list entry or an entire access list.
delete scsirouter Delete the named SCSI routing instance or the specified element of the
SCSI routing instance.
restore accesslist Restore the named access list or all access lists from the named
configuration file.
restore scsirouter Restore the named SCSI routing instance from the named configuration file.
save accesslist Save configuration data for the named access list or all access lists.
save scsirouter Save configuration information for the named SCSI routing instance.
scsirouter Create a SCSI routing instance.
scsirouter enable Stop or start the named SCSI routing instance.
scsirouter primary Identify a storage router as the preferred storage router to run the named
SCSI routing instance.
scsirouter serverif Assign a Gigabit Ethernet interface, IP address, and optionally a VLAN to
the named SCSI routing instance.
scsirouter target
accesslist
Associate an access list with a specific SCSI routing instance target or all
targets.
setup scsi Run the wizard to configure a SCSI routing instance.
show accesslist Display the contents of the named access list or all access lists.
show scsirouter Display configuration and operational information for the named SCSI
routing instance.